Power Distribution
Eaton Corporation is recognized around the world as the leading designer and manufacturer of quality Marina lighting and power pedestals, and with good reason; Eaton products reflect a commitment to excellence at competitive pricing. With a comprehensive selection of marina lighting and safety offerings, IMS can provide the perfect solution for any need and location. Beautiful, durable, and built with wide range of features and available options, Eaton Power Pedestals and Marina lighting fixtures are made of UV resistant high density resin or polyester coated stainless steel for decades of reliable service. You can find Eaton products installed on boardwalks, in RV parks, around pools, on decks, landscaped areas, and of course marinas. Please contact our sales staff for assistance
| |
Mega Yacht Unit
From the company that is known for its high quality innovations, Eaton is the only company to offer a self-contained dual-phase mega yacht unit. Made out of long lasting stainless steel, this mega yacht unit has a copper-wound, low noise transformer that is double insulated and epoxy overcoated.The mega yacht unit delivers both single-phase and threephase power to serve most mega yachts. Helping to keep your marina environment tranquil, the mega yacht unit has a low noise, highly efficient transformer that has isolation mounts to ensure a very quiet operation.
Standard Features
- Thermostatically Controlled Fans in Transformer Compartment for Cooling
- Heavy Stainless Steel (316L) Cabinet with a Polyester Powder Coating
- Ventilated Sun Shields to Help Unit Run Cooler in Tropical Climates
- Limited Lifetime Warranty on Housing
- Two or Three Light 13Watt Photocell Controlled Fluorescent Lights on the Sun Shield for Optimal Night Lighting
|
|
Available Options
- 200A-480V-3P Receptacles
- 100% Rated Breakers
- Hard Wiring Bus Bars for All Voltages with Breaker Protection
- Two 3/4”Water Outlets with aWater Meter
- Two Phone, Two CATV, and Two CAT5 High-Speed Internet Connections
- Digital Electronic Meters on All Receptacles
- Primary Breaker
- Two 480V Delta or WYE 125 Amp Three-Phase Receptacles (IEC)
- Two 120/208V 100 Amp Three-Phase Receptacles (IEC)
- Two 120/240V 100 Amp Single-Phase Receptacles (IEC)
- Up to Four 50 Amp 120/240V Locking Receptacles (NEMA)
- Up to Four 30 Amp 120V Locking Receptacles (NEMA)
- Wireless Remote Metering for Electric and Water
- 20 Amp GFI Receptacle
- Primary Side 480V Maximum 600A
- Secondary Side 1ø 120 / 240V Maximum 100KVA
- Secondary Side 3ø 120 / 208V Maximum 125KVA
- Fire Extinguisher - 10 or 20 lbs
|
| |
Marina Substation
The introduction of substations into the marina and recreational vehicle market allows Eaton to be your complete marina and RV park electrical products supplier. We are able to assist in the design and layout of your marina or RV park electrical system from the primary service provider to your power pedestal. Our substations are designed for any coastal or inland environment and are constructed with powder coated stainless steel NEMA 3R housing cabinets. All substation cabinets come with our limited lifetime warranty.
Ventilation
The substation ventilation is designed to optimize air circulation over and around the transformers and through the panel compartment so that the substation operates at lower temperatures. Substations come equipped with temperature controlled cooling fans for exhausting hot air from the cabinet and solar shield. In addition, substations are available with a doublewalled cabinet and solar shield which allow for cooling of both the exterior surface of the cabinet and the internal components.
|
|
Available Options
- Powder Coated Cabinets Made of Stainless Steel Hardware with Locking Doors
- Limited Lifetime Warranty on Housing. Transformer and Secondary Distribution Panel in a Single Enclosure Have a One Year Limited Warranty
- Single-Phase and Three-Phase Models
- Overload Capacity Meets ANSI L57.96 - 01.250
- Optional Double-Walled Construction
- Temperature Controlled Fans for Cooling
- Custom Made Copper Wound Single-Phase or Three-Phase Transformers from 50 to 330 KVA
- Up to 1200 Amp Main Circuit Breaker with 16 Single-Phase Branch Circuit Breakers or 10 Three-Phase Branch Circuit Breakers
- Substations Can Be Equipped with Photocells to Turn On and Off Lights
- Ground Fault Monitoring System
|
| |
Surge Protector
Surgetrap™ is designed to protect electrical and electronic loads from transients and surge disturbances on your AC power line, such as voltage surges, spikes, and lightning.
- 175 KA Maximum Surge Current
- 3500 Joules
- UL/CSA Listed
- 3R Enclosure
- Comes with a Protection Working Indication Light
The Surgetrap™ has a Lifetime Warranty where Eaton will replace the device at no extra charge. If you buy the power pedestal factory installed from Eaton’s manufacturing facility, we will extend the warranty on all internal components of the Lighthouse or Lighthouse SS power pedestal for three years as opposed to the two year warranty.We can also provide you with the installation kit for the Lighthouse or Lighthouse SS Power Pedestal to retrofit your marina.
|
|
|
| |
Marina Ground Fault Monitors
Our ground fault monitoring systems are designed to detect fault currents in the AC shore power system that are too low to trip a circuit breaker. The Ground Fault Monitor helps reduce the risk of injury or property damage, which may result from stray fault currents. Our ground fault monitoring system provides information to the maintenance staff on the overall condition of the AC electrical system. The round fault monitoring system perates 4-hours a day and can be monitored by non-technical personnel.
Power GuardThe ground fault monitor detects ground fault currents by means of current transformers (CT), which are placed around main or branch circuits. If a ground fault occurs, the CT will detect the amount of fault current and send a signal to the ground fault monitoring device where the amount of fault current is displayed with the faulty circuit identified. The detected fault can either activate an indicator alarm or disconnect the faulted circuit.
Standard Features
- Underwriters Laboratories Listed Current Transformers
- Adjustable Trip Level 10mAmps to 10 Amps
- Current Transformers up to 8 1/4” Diameter
- Visual and/or Audible Alarm
- Housing of Fiberglass, or Powder Coated Stainless Steel Available
|
|
|
| |
Marina Panels
One of the many products we can offer our customers are the Cutler-Hammer PRL-3A & PRL-4 panels as stand alone units or in one of our substations. All of our busses are made of copper and are load rated, breakers are bolt-on type. Distribution panels can be 120/240V single-phase, 120/208V three-phase, 277/480V three-phase, or 220Y/127V three-phase based on your system requirements. Distribution panels can also have a main breaker or a main lug. Branch circuit breakers are provided based on customer requirements.
Standard Features
- All Internal Wiring Is Fine Stranded 1000 Volt Insulated Copper
- Copper Bus Bars
- All Exterior Hardware Is Stainless Steel
- Underwriters Laboratories Listed
|
|
Available Options
- NEMA 3R, or 4X
- Powder Coated or Stainless Steel (316L)
- Main Breaker up to 1200 Amps
- Branch Breaker 20 to 1200 Amps
- Main Lug Only
|
| |
Marina Transformers
Because of the high humidity and corrosive conditions of coastal environments, our transformers are wound with Class H heavily insulated copper bar and are double dipped in tough insulating varnish that protects the copper, as well as reduces the hum that is typical in a transformer that is not double dipped. We provide a second overcoat of high temperature epoxy to protect against the severe saltwater environment. We can provide this transformer in single-phase, from 50 to 500 KVA, and three-phase, from 45 to 300 KVA.
Standard Features
- Copper Wound Transformer Coils Double Dipped in High Temperature Baking Varnish
- All Internal Wiring Is Fine Stranded 2000 Volt Insulated Copper
- Copper Terminations
- Marine Transformers with Epoxy Overcoat
- All Copper to Copper Connections
|
|
Available Options
- Single-Phase: 50 to 500 KVA
- Three-Phase: 45 to 300 KVA
- Epoxy Overcoat for Marine Applications
- Dual-Phase Option
|
| |
|
|
|
